 |
INDUSTRIAL METALWORKING LUBRICANTS |
|
|
|
Phone: 817-293-4645 |
FAX: 817-293-4646 |
||
|
|
|||
| ||||||||||
|
DURAHONE HH is a low-viscosity petroleum-based oil formulated expressly for the precision tube-honing operations of ferrous metals and alloys. Its blend of select hydrotreated aliphatic base-stocks compounded with highly refined sulfurized olefins and film strength additives yield an excellent tube-honing oil with superior performance properties. The balanced additive system developed inthe field as well as the laboratory produce rapid stock removal rates and higher productivity. DURAHONE HH provides longer hone life and supr finishes in the most demanding honing operations.
With a minimum flash point of 275F, DURAHONE HH minimizes the danger of incidents due to combustion or combustion vapors, thereby increasing operator health and safety. The effectiveness of its high-detergency characteristics protects against hone-loading while maintaining a very low evaporation rate Honing oil composition and viscosity stay virtually constant.
ADVANTAGES
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES
DURAHONE OILS are available in 55 gallon steel drums, totes and bulk quantities.
For additional information,
product samples, etc., please contact;
MAXIM
OIL & CHEMICAL COMPANY Fort
Worth Texas Metro
(817) 293-4645 latest revision 2009 DISCLAIMER Information contained herein is believed to be correct and reliable. However, Maxim Petrochemical Corporation does not assume liability for it or for recommendations of our representatives inasmuch as conditions and methods of use are beyond our control. Further, we make no warranty, expressed or implied, of any kind regarding those products or their use and purchaser assumes all risks of use or handling either in accordance with directions or not. MANUFACTURER DISCLAIMER The information and recommendations contained herein are, to the best of the knowledge and belief of Maxim Petrochemical Corporation, accurate and reliable as of the date issued. Maxim does not warrant or guarantee their reliability, and Maxim shall not be liable for any loss or damage arising out of use thereof. The information and recommendations are for the user's consideration and examination. Conditions of use are beyond Maxim's control and therefore users are responsible to verify this data under their own operating conditions to determine whether the product is suitable for their particular purposes and they assume all risk of their use, handling, and disposal of the product(s). This information relates only to the product(s) designated herein and does not relate to its use in combination with any other material or in any other process. |
|
