SEE WHAT'S NEW AT MAXIM
OIL & CHEMICAL:
![](_themes/maxim-oil-01/indhorsa.gif)
NEW AND IMPROVED:
![NEW !](what's_new_files/image001.gif)
MAXUS NC TAP w/ MoS2
Chlorine Free Tapping / Threading Compounds with
Molybdenum Disulfide (MoS2)
MAXUS NC TAP w/
MoS2 are multifunctional compounds developed specifically for cutting, tapping,
reaming, and threading operations on ferrous metals. These non-petroleum,
polymeric-ester-based products demonstrate high film strengths and outstanding
wetting properties. MAXUS NC TAP contains Extreme Pressure components,
including MoS2, for increased tool-life and a superior finish on
difficult-to-machine alloys. Maxus NC Tapping Compounds are not formulated
using chlorinated extreme pressured additives.
MAXUS GS8 PREMUIM CUTTING and GRINDING FLUID
MAXUS GS8 represents the next
generation of Maxim's GS series of water-extendable metalworking fluids.
For enhanced environmental acceptance, MAXUS GS8 is formulated without the use
of DEA, DCHA, formaldehyde, or formaldehyde-releasing biocides. When mixed
with water, MAXUS GS8 forms a trans-lucent emulsion that exhibits excellent
cooling properties for superior finishes and increased tool-life. MAXUS
GS8 is suitable for the machining and grinding of ferrous and most non-ferrous
alloys.
AUTOMAX METALWORKING OILS
AUTOMAX represents a line of
multi-purpose, light colored cutting fluids specifically designed for use in the
machining of ferrous and non-ferrous alloys where the use of oils containing
"active sulfur" may result in the staining of non-ferrous parts and machine-tool
components. Automax oils are not formulated using chlorine additives.
Instead, a
combination of extreme pressure sulfurized polymeric olefins and friction-modifying
compounds promote optimum performance while exhibiting improved environmental
conditions for operators such as lower oil-mist as well as improved thermal
stability and lower smoking tendencies. Automax oils are available in seven
ascending grades.
DURAHONE HH - TUBE HONING OIL
DURAHONE H-H is a low-viscosity
petroleum-based oil formulated expressly for the precision tube-honing
operations of ferrous metals and alloys.
With a minimum flash point of
275F, Durahone HH is not regulated by
DOT. DURAHONE H-H minimizes
the danger of incidents due to combustion or combustion vapors, thereby
increasing operator health and safety ....While lowering costs of compliance and
insurance. The
effectiveness of its high-detergency characteristics protects against
hone-loading while maintaining a very low evaporation rate. Honing oil
composition and viscosity stay virtually constant.
![](_themes/maxim-oil-01/indhorsa.gif)
SDS+GHS is HERE!!!!
Maxim is in the process of replacing MSDS(s) with HAZCOM SDS+GHS in
compliance with the coming HAZCOM/GHS requirements. The first "roll-out"
of SDS' will be around February 1, 2015. This will include most
metalworking oils, hydraulic/machine oils, most rust preventives, etc.
Water-extendible metalworking fluids, soaps, and soluble rust preventives will
follow as they are published.
06/01/2016 UPDATE: Full
Compliance
Container labeling, updated to include GHS formatted information will follow
shortly thereafter.
HAZCOM 2012/GHS useful links /
doc.s:
HAZCOM
GHS- TIMELINE
HAZCOM GHS- Whitepaper (
from JJ Keller)
HAZCOM GHS- Sample
pictorials and descriptions
![](_themes/maxim-oil-01/indhorsa.gif)
![](_themes/maxim-oil-01/indhorsa.gif)
Lee's list of useless information. I am frequently asked for these
measurements and or equations.....